[ SEA-GHOST MINI SHELL]
IPV6-TCP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE,
mib-2, experimental FROM SNMPv2-SMI
Ipv6Address, Ipv6IfIndexOrZero FROM IPV6-TC;
ipv6TcpMIB MODULE-IDENTITY
LAST-UPDATED "9801290000Z"
ORGANIZATION "IETF IPv6 MIB Working Group"
CONTACT-INFO
" Mike Daniele
Postal: Compaq Computer Corporation
110 Spitbrook Rd
Nashua, NH 03062.
US
Phone: +1 603 884 1423
Email: daniele@zk3.dec.com"
DESCRIPTION
"The MIB module for entities implementing TCP over IPv6."
::= { experimental 86 }
-- objects specific to TCP for IPv6
tcp OBJECT IDENTIFIER ::= { mib-2 6 }
-- the TCP over IPv6 Connection table
-- This connection table contains information about this
-- entity's existing TCP connections between IPv6 endpoints.
-- Only connections between IPv6 addresses are contained in
-- this table. This entity's connections between IPv4
-- endpoints are contained in tcpConnTable.
ipv6TcpConnTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv6TcpConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing TCP connection-specific information,
for only those connections whose endpoints are IPv6 addresses."
::= { tcp 16 }
ipv6TcpConnEntry OBJECT-TYPE
SYNTAX Ipv6TcpConnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of the ipv6TcpConnTable containing
information about a particular current TCP connection.
Each row of this table is transient, in that it ceases to
exist when (or soon after) the connection makes the transition
to the CLOSED state.
Note that conceptual rows in this table require an additional
index object compared to tcpConnTable, since IPv6 addresses
are not guaranteed to be unique on the managed node."
INDEX { ipv6TcpConnLocalAddress,
ipv6TcpConnLocalPort,
ipv6TcpConnRemAddress,
ipv6TcpConnRemPort,
ipv6TcpConnIfIndex }
::= { ipv6TcpConnTable 1 }
Ipv6TcpConnEntry ::=
SEQUENCE { ipv6TcpConnLocalAddress Ipv6Address,
ipv6TcpConnLocalPort INTEGER (0..65535),
ipv6TcpConnRemAddress Ipv6Address,
ipv6TcpConnRemPort INTEGER (0..65535),
ipv6TcpConnIfIndex Ipv6IfIndexOrZero,
ipv6TcpConnState INTEGER }
ipv6TcpConnLocalAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local IPv6 address for this TCP connection. In
the case of a connection in the listen state which
is willing to accept connections for any IPv6
address associated with the managed node, the value
::0 is used."
::= { ipv6TcpConnEntry 1 }
ipv6TcpConnLocalPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local port number for this TCP connection."
::= { ipv6TcpConnEntry 2 }
ipv6TcpConnRemAddress OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote IPv6 address for this TCP connection."
::= { ipv6TcpConnEntry 3 }
ipv6TcpConnRemPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The remote port number for this TCP connection."
::= { ipv6TcpConnEntry 4 }
ipv6TcpConnIfIndex OBJECT-TYPE
SYNTAX Ipv6IfIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index object used to disambiguate conceptual rows in
the table, since the connection 4-tuple may not be unique.
If the connection's remote address (ipv6TcpConnRemAddress)
is a link-local address and the connection's local address
(ipv6TcpConnLocalAddress) is not a link-local address, this
object identifies a local interface on the same link as
the connection's remote link-local address.
Otherwise, this object identifies the local interface that
is associated with the ipv6TcpConnLocalAddress for this
TCP connection. If such a local interface cannot be determined,
this object should take on the value 0. (A possible example
of this would be if the value of ipv6TcpConnLocalAddress is ::0.)
The interface identified by a particular non-0 value of this
index is the same interface as identified by the same value
of ipv6IfIndex.
The value of this object must remain constant during the life
of the TCP connection."
::= { ipv6TcpConnEntry 5 }
ipv6TcpConnState OBJECT-TYPE
SYNTAX INTEGER {
closed(1),
listen(2),
synSent(3),
synReceived(4),
established(5),
finWait1(6),
finWait2(7),
closeWait(8),
lastAck(9),
closing(10),
timeWait(11),
deleteTCB(12) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of this TCP connection.
The only value which may be set by a management station is
deleteTCB(12). Accordingly, it is appropriate for an agent
to return an error response (`badValue' for SNMPv1, 'wrongValue'
for SNMPv2) if a management station attempts to set this
object to any other value.
If a management station sets this object to the value
deleteTCB(12), then this has the effect of deleting the TCB
(as defined in RFC 793) of the corresponding connection on
the managed node, resulting in immediate termination of the
connection.
As an implementation-specific option, a RST segment may be
sent from the managed node to the other TCP endpoint (note
however that RST segments are not sent reliably)."
::= { ipv6TcpConnEntry 6 }
--
-- conformance information
--
ipv6TcpConformance OBJECT IDENTIFIER ::= { ipv6TcpMIB 2 }
ipv6TcpCompliances OBJECT IDENTIFIER ::= { ipv6TcpConformance 1 }
ipv6TcpGroups OBJECT IDENTIFIER ::= { ipv6TcpConformance 2 }
-- compliance statements
ipv6TcpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMPv2 entities which
implement TCP over IPv6."
MODULE -- this module
MANDATORY-GROUPS { ipv6TcpGroup }
::= { ipv6TcpCompliances 1 }
ipv6TcpGroup OBJECT-GROUP
OBJECTS { -- these are defined in this module
-- ipv6TcpConnLocalAddress (not-accessible)
-- ipv6TcpConnLocalPort (not-accessible)
-- ipv6TcpConnRemAddress (not-accessible)
-- ipv6TcpConnRemPort (not-accessible)
-- ipv6TcpConnIfIndex (not-accessible)
ipv6TcpConnState }
STATUS current
DESCRIPTION
"The group of objects providing management of
TCP over IPv6."
::= { ipv6TcpGroups 1 }
END
SEA-GHOST - SHELL CODING BY SEA-GHOST