[ SEA-GHOST MINI SHELL]
Please refer to the IDLEfork and IDLE CVS repositories for
change details subsequent to the 0.8.1 release.
IDLEfork ChangeLog
==================
2001-07-20 11:35 elguavas
* README.txt, NEWS.txt: bring up to date for 0.8.1 release
2001-07-19 16:40 elguavas
* IDLEFORK.html: replaced by IDLEFORK-index.html
2001-07-19 16:39 elguavas
* IDLEFORK-index.html: updated placeholder idlefork homepage
2001-07-19 14:49 elguavas
* ChangeLog, EditorWindow.py, INSTALLATION, NEWS.txt, README.txt,
TODO.txt, idlever.py:
minor tidy-ups ready for 0.8.1 alpha tarball release
2001-07-17 15:12 kbk
* INSTALLATION, setup.py: INSTALLATION: Remove the coexist.patch
instructions
**************** setup.py:
Remove the idles script, add some words on IDLE Fork to the
long_description, and clean up some line spacing.
2001-07-17 15:01 kbk
* coexist.patch: Put this in the attic, at least for now...
2001-07-17 14:59 kbk
* PyShell.py, idle, idles: Implement idle command interface as
suggested by GvR [idle-dev] 16 July **************** PyShell: Added
functionality:
usage: idle.py [-c command] [-d] [-i] [-r script] [-s] [-t title]
[arg] ...
idle file(s) (without options) edit the file(s)
-c cmd run the command in a shell -d enable the
debugger -i open an interactive shell -i file(s) open a
shell and also an editor window for each file -r script run a file
as a script in a shell -s run $IDLESTARTUP or
$PYTHONSTARTUP before anything else -t title set title of shell
window
Remaining arguments are applied to the command (-c) or script (-r).
****************** idles: Removed the idles script, not needed
****************** idle: Removed the IdleConf references, not
required anymore
2001-07-16 17:08 kbk
* INSTALLATION, coexist.patch: Added installation instructions.
Added a patch which modifies idlefork so that it can co-exist with
"official" IDLE in the site-packages directory. This patch is not
necessary if only idlefork IDLE is installed. See INSTALLATION for
further details.
2001-07-16 15:50 kbk
* idles: Add a script "idles" which opens a Python Shell window.
The default behaviour of idlefork idle is to open an editor window
instead of a shell. Complex expressions may be run in a fresh
environment by selecting "run". There are times, however, when a
shell is desired. Though one can be started by "idle -t 'foo'",
this script is more convenient. In addition, a shell and an editor
window can be started in parallel by "idles -e foo.py".
2001-07-16 15:25 kbk
* PyShell.py: Call out IDLE Fork in startup message.
2001-07-16 14:00 kbk
* PyShell.py, setup.py: Add a script "idles" which opens a Python
Shell window.
The default behaviour of idlefork idle is to open an editor window
instead of a shell. Complex expressions may be run in a fresh
environment by selecting "run". There are times, however, when a
shell is desired. Though one can be started by "idle -t 'foo'",
this script is more convenient. In addition, a shell and an editor
window can be started in parallel by "idles -e foo.py".
2001-07-15 03:06 kbk
* pyclbr.py, tabnanny.py: tabnanny and pyclbr are now found in /Lib
2001-07-15 02:29 kbk
* BrowserControl.py: Remove, was retained for 1.5.2 support
2001-07-14 15:48 kbk
* setup.py: Installing Idle to site-packages via Distutils does not
copy the Idle help.txt file.
Ref SF Python Patch 422471
2001-07-14 15:26 kbk
* keydefs.py: py-cvs-2001_07_13 (Rev 1.3) merge
"Make copy, cut and paste events case insensitive. Reported by
Patrick K. O'Brien on idle-dev. (Should other bindings follow
suit?)" --GvR
2001-07-14 15:21 kbk
* idle.py: py-cvs-2001_07_13 (Rev 1.4) merge
"Move the action of loading the configuration to the IdleConf
module rather than the idle.py script. This has advantages and
disadvantages; the biggest advantage being that we can more easily
have an alternative main program." --GvR
2001-07-14 15:18 kbk
* extend.txt: py-cvs-2001_07_13 (Rev 1.4) merge
"Quick update to the extension mechanism (extend.py is gone, long
live config.txt)" --GvR
2001-07-14 15:15 kbk
* StackViewer.py: py-cvs-2001_07_13 (Rev 1.16) merge
"Refactored, with some future plans in mind. This now uses the new
gotofileline() method defined in FileList.py" --GvR
2001-07-14 15:10 kbk
* PyShell.py: py-cvs-2001_07_13 (Rev 1.34) merge
"Amazing. A very subtle change in policy in descr-branch actually
found a bug here. Here's the deal: Class PyShell derives from
class OutputWindow. Method PyShell.close() wants to invoke its
parent method, but because PyShell long ago was inherited from
class PyShellEditorWindow, it invokes
PyShelEditorWindow.close(self). Now, class PyShellEditorWindow
itself derives from class OutputWindow, and inherits the close()
method from there without overriding it. Under the old rules,
PyShellEditorWindow.close would return an unbound method restricted
to the class that defined the implementation of close(), which was
OutputWindow.close. Under the new rules, the unbound method is
restricted to the class whose method was requested, that is
PyShellEditorWindow, and this was correctly trapped as an error."
--GvR
2001-07-14 14:59 kbk
* PyParse.py: py-cvs-2001_07_13 (Rel 1.9) merge
"Taught IDLE's autoident parser that "yield" is a keyword that
begins a stmt. Along w/ the preceding change to keyword.py, making
all this work w/ a future-stmt just looks harder and harder."
--tim_one
(From Rel 1.8: "Hack to make this still work with Python 1.5.2.
;-( " --fdrake)
2001-07-14 14:51 kbk
* IdleConf.py: py-cvs-2001_07_13 (Rel 1.7) merge
"Move the action of loading the configuration to the IdleConf
module rather than the idle.py script. This has advantages and
disadvantages; the biggest advantage being that we can more easily
have an alternative main program." --GvR
2001-07-14 14:45 kbk
* FileList.py: py-cvs-2000_07_13 (Rev 1.9) merge
"Delete goodname() method, which is unused. Add gotofileline(), a
convenience method which I intend to use in a variant. Rename
test() to _test()." --GvR
This was an interesting merge. The join completely missed removing
goodname(), which was adjacent, but outside of, a small conflict.
I only caught it by comparing the 1.1.3.2/1.1.3.3 diff. CVS ain't
infallible.
2001-07-14 13:58 kbk
* EditorWindow.py: py-cvs-2000_07_13 (Rev 1.38) merge "Remove
legacy support for the BrowserControl module; the webbrowser module
has been included since Python 2.0, and that is the preferred
interface." --fdrake
2001-07-14 13:32 kbk
* EditorWindow.py, FileList.py, IdleConf.py, PyParse.py,
PyShell.py, StackViewer.py, extend.txt, idle.py, keydefs.py: Import
the 2001 July 13 23:59 GMT version of Python CVS IDLE on the
existing 1.1.3 vendor branch named py-cvs-vendor-branch. Release
tag is py-cvs-2001_07_13.
2001-07-14 12:02 kbk
* Icons/python.gif: py-cvs-rel2_1 (Rev 1.2) merge Copied py-cvs rev
1.2 changed file to idlefork MAIN
2001-07-14 11:58 kbk
* Icons/minusnode.gif: py-cvs-rel2_1 (Rev 1.2) merge Copied py-cvs
1.2 changed file to idlefork MAIN
2001-07-14 11:23 kbk
* ScrolledList.py: py-cvs-rel2_1 (rev 1.5) merge - whitespace
normalization
2001-07-14 11:20 kbk
* Separator.py: py-cvs-rel2_1 (Rev 1.3) merge - whitespace
normalization
2001-07-14 11:16 kbk
* StackViewer.py: py-cvs-rel2_1 (Rev 1.15) merge - whitespace
normalization
2001-07-14 11:14 kbk
* ToolTip.py: py-cvs-rel2_1 (Rev 1.2) merge - whitespace
normalization
2001-07-14 10:13 kbk
* PyShell.py: cvs-py-rel2_1 (Rev 1.29 - 1.33) merge
Merged the following py-cvs revs without conflict: 1.29 Reduce
copyright text output at startup 1.30 Delay setting sys.args until
Tkinter is fully initialized 1.31 Whitespace normalization 1.32
Turn syntax warning into error when interactive 1.33 Fix warning
initialization bug
Note that module is extensively modified wrt py-cvs
2001-07-14 06:33 kbk
* PyParse.py: py-cvs-rel2_1 (Rev 1.6 - 1.8) merge Fix autoindent
bug and deflect Unicode from text.get()
2001-07-14 06:00 kbk
* Percolator.py: py-cvs-rel2_1 (Rev 1.3) "move "from Tkinter import
*" to module level" --jhylton
2001-07-14 05:57 kbk
* PathBrowser.py: py-cvs-rel2_1 (Rev 1.6) merge - whitespace
normalization
2001-07-14 05:49 kbk
* ParenMatch.py: cvs-py-rel2_1 (Rev 1.5) merge - whitespace
normalization
2001-07-14 03:57 kbk
* ObjectBrowser.py: py-cvs-rel2_1 (Rev 1.3) merge "Make the test
program work outside IDLE." -- GvR
2001-07-14 03:52 kbk
* MultiStatusBar.py: py-cvs-rel2_1 (Rev 1.2) merge - whitespace
normalization
2001-07-14 03:44 kbk
* MultiScrolledLists.py: py-cvs-rel2_1 (Rev 1.2) merge - whitespace
normalization
2001-07-14 03:40 kbk
* IdleHistory.py: py-cvs-rel2_1 (Rev 1.4) merge - whitespace
normalization
2001-07-14 03:38 kbk
* IdleConf.py: py-cvs-rel2_1 (Rev 1.6) merge - whitespace
normalization
2001-07-13 14:18 kbk
* IOBinding.py: py-cvs-rel2_1 (Rev 1.4) merge - move "import *" to
module level
2001-07-13 14:12 kbk
* FormatParagraph.py: py-cvs-rel2_1 (Rev 1.9) merge - whitespace
normalization
2001-07-13 14:07 kbk
* FileList.py: py-cvs-rel2_1 (Rev 1.8) merge - whitespace
normalization
2001-07-13 13:35 kbk
* EditorWindow.py: py-cvs-rel2_1 (Rev 1.33 - 1.37) merge
VP IDLE version depended on VP's ExecBinding.py and spawn.py to get
the path to the Windows Doc directory (relative to python.exe).
Removed this conflicting code in favor of py-cvs updates which on
Windows use a hard coded path relative to the location of this
module. py-cvs updates include support for webbrowser.py. Module
still has BrowserControl.py for 1.5.2 support.
At this point, the differences wrt py-cvs relate to menu
functionality.
2001-07-13 11:30 kbk
* ConfigParser.py: py-cvs-rel2_1 merge - Remove, lives in /Lib
2001-07-13 10:10 kbk
* Delegator.py: py-cvs-rel2_1 (Rev 1.3) merge - whitespace
normalization
2001-07-13 10:07 kbk
* Debugger.py: py-cvs-rel2_1 (Rev 1.15) merge - whitespace
normalization
2001-07-13 10:04 kbk
* ColorDelegator.py: py-cvs-rel2_1 (Rev 1.11 and 1.12) merge
Colorize "as" after "import" / use DEBUG instead of __debug__
2001-07-13 09:54 kbk
* ClassBrowser.py: py-cvs-rel2_1 (Rev 1.12) merge - whitespace
normalization
2001-07-13 09:41 kbk
* BrowserControl.py: py-cvs-rel2_1 (Rev 1.1) merge - New File -
Force HEAD to trunk with -f Note: browser.py was renamed
BrowserControl.py 10 May 2000. It provides a collection of classes
and convenience functions to control external browsers "for 1.5.2
support". It was removed from py-cvs 18 April 2001.
2001-07-13 09:10 kbk
* CallTips.py: py-cvs-rel2_1 (Rev 1.8) merge - whitespace
normalization
2001-07-13 08:26 kbk
* CallTipWindow.py: py-cvs-rel2_1 (Rev 1.3) merge - whitespace
normalization
2001-07-13 08:13 kbk
* AutoExpand.py: py-cvs-rel1_2 (Rev 1.4) merge, "Add Alt-slash to
Unix keydefs (I somehow need it on RH 6.2). Get rid of assignment
to unused self.text.wordlist." --GvR
2001-07-12 16:54 elguavas
* ReplaceDialog.py: py-cvs merge, python 1.5.2 compatibility
2001-07-12 16:46 elguavas
* ScriptBinding.py: py-cvs merge, better error dialog
2001-07-12 16:38 elguavas
* TODO.txt: py-cvs merge, additions
2001-07-12 15:35 elguavas
* WindowList.py: py-cvs merge, correct indentation
2001-07-12 15:24 elguavas
* config.txt: py-cvs merge, correct typo
2001-07-12 15:21 elguavas
* help.txt: py-cvs merge, update colour changing info
2001-07-12 14:51 elguavas
* idle.py: py-cvs merge, idle_dir loading changed
2001-07-12 14:44 elguavas
* idlever.py: py-cvs merge, version update
2001-07-11 12:53 kbk
* BrowserControl.py: Initial revision
2001-07-11 12:53 kbk
* AutoExpand.py, BrowserControl.py, CallTipWindow.py, CallTips.py,
ClassBrowser.py, ColorDelegator.py, Debugger.py, Delegator.py,
EditorWindow.py, FileList.py, FormatParagraph.py, IOBinding.py,
IdleConf.py, IdleHistory.py, MultiScrolledLists.py,
MultiStatusBar.py, ObjectBrowser.py, OutputWindow.py,
ParenMatch.py, PathBrowser.py, Percolator.py, PyParse.py,
PyShell.py, RemoteInterp.py, ReplaceDialog.py, ScriptBinding.py,
ScrolledList.py, Separator.py, StackViewer.py, TODO.txt,
ToolTip.py, WindowList.py, config.txt, help.txt, idle, idle.bat,
idle.py, idlever.py, setup.py, Icons/minusnode.gif,
Icons/python.gif: Import the release 2.1 version of Python CVS IDLE
on the existing 1.1.3 vendor branch named py-cvs-vendor-branch,
with release tag py-cvs-rel2_1.
2001-07-11 12:34 kbk
* AutoExpand.py, AutoIndent.py, Bindings.py, CallTipWindow.py,
CallTips.py, ChangeLog, ClassBrowser.py, ColorDelegator.py,
Debugger.py, Delegator.py, EditorWindow.py, FileList.py,
FormatParagraph.py, FrameViewer.py, GrepDialog.py, IOBinding.py,
IdleConf.py, IdleHistory.py, MultiScrolledLists.py,
MultiStatusBar.py, NEWS.txt, ObjectBrowser.py, OldStackViewer.py,
OutputWindow.py, ParenMatch.py, PathBrowser.py, Percolator.py,
PyParse.py, PyShell.py, README.txt, RemoteInterp.py,
ReplaceDialog.py, ScriptBinding.py, ScrolledList.py,
SearchBinding.py, SearchDialog.py, SearchDialogBase.py,
SearchEngine.py, Separator.py, StackViewer.py, TODO.txt,
ToolTip.py, TreeWidget.py, UndoDelegator.py, WidgetRedirector.py,
WindowList.py, ZoomHeight.py, __init__.py, config-unix.txt,
config-win.txt, config.txt, eventparse.py, extend.txt, help.txt,
idle.bat, idle.py, idle.pyw, idlever.py, keydefs.py, pyclbr.py,
tabnanny.py, testcode.py, Icons/folder.gif, Icons/minusnode.gif,
Icons/openfolder.gif, Icons/plusnode.gif, Icons/python.gif,
Icons/tk.gif: Import the 9 March 2000 version of Python CVS IDLE as
1.1.3 vendor branch named py-cvs-vendor-branch.
2001-07-04 13:43 kbk
* Icons/: folder.gif, minusnode.gif, openfolder.gif, plusnode.gif,
python.gif, tk.gif: Null commit with -f option to force an uprev
and put HEADs firmly on the trunk.
2001-07-04 13:15 kbk
* AutoExpand.py, AutoIndent.py, Bindings.py, CallTipWindow.py,
CallTips.py, ChangeLog, ClassBrowser.py, ColorDelegator.py,
ConfigParser.py, Debugger.py, Delegator.py, EditorWindow.py,
ExecBinding.py, FileList.py, FormatParagraph.py, FrameViewer.py,
GrepDialog.py, IDLEFORK.html, IOBinding.py, IdleConf.py,
IdleHistory.py, MultiScrolledLists.py, MultiStatusBar.py, NEWS.txt,
ObjectBrowser.py, OldStackViewer.py, OutputWindow.py,
ParenMatch.py, PathBrowser.py, Percolator.py, PyParse.py,
PyShell.py, README.txt, Remote.py, RemoteInterp.py,
ReplaceDialog.py, ScriptBinding.py, ScrolledList.py,
SearchBinding.py, SearchDialog.py, SearchDialogBase.py,
SearchEngine.py, Separator.py, StackViewer.py, TODO.txt,
ToolTip.py, TreeWidget.py, UndoDelegator.py, WidgetRedirector.py,
WindowList.py, ZoomHeight.py, __init__.py, config-unix.txt,
config-win.txt, config.txt, eventparse.py, extend.txt, help.txt,
idle, idle.bat, idle.py, idle.pyw, idlever.py, keydefs.py,
loader.py, protocol.py, pyclbr.py, setup.py, spawn.py, tabnanny.py,
testcode.py: Null commit with -f option to force an uprev and put
HEADs firmly on the trunk.
2001-06-27 10:24 elguavas
* IDLEFORK.html: updated contact details
2001-06-25 17:23 elguavas
* idle, RemoteInterp.py, setup.py: Initial revision
2001-06-25 17:23 elguavas
* idle, RemoteInterp.py, setup.py: import current python cvs idle
as a vendor branch
2001-06-24 15:10 elguavas
* IDLEFORK.html: tiny change to test new syncmail setup
2001-06-24 14:41 elguavas
* IDLEFORK.html: change to new developer contact, also a test
commit for new syncmail setup
2001-06-23 18:15 elguavas
* IDLEFORK.html: tiny test update for revitalised idle-fork
2000-09-24 17:29 nriley
* protocol.py: Fixes for Python 1.6 compatibility - socket bind and
connect get a tuple instead two arguments.
2000-09-24 17:28 nriley
* spawn.py: Change for Python 1.6 compatibility - UNIX's 'os'
module defines 'spawnv' now, so we check for 'fork' first.
2000-08-15 22:51 nowonder
* IDLEFORK.html:
corrected email address
2000-08-15 22:47 nowonder
* IDLEFORK.html:
added .html file for http://idlefork.sourceforge.net
2000-08-15 11:13 dscherer
* AutoExpand.py, AutoIndent.py, Bindings.py, CallTipWindow.py,
CallTips.py, __init__.py, ChangeLog, ClassBrowser.py,
ColorDelegator.py, ConfigParser.py, Debugger.py, Delegator.py,
FileList.py, FormatParagraph.py, FrameViewer.py, GrepDialog.py,
IOBinding.py, IdleConf.py, IdleHistory.py, MultiScrolledLists.py,
MultiStatusBar.py, NEWS.txt, ObjectBrowser.py, OldStackViewer.py,
OutputWindow.py, ParenMatch.py, PathBrowser.py, Percolator.py,
PyParse.py, PyShell.py, README.txt, ReplaceDialog.py,
ScriptBinding.py, ScrolledList.py, SearchBinding.py,
SearchDialog.py, SearchDialogBase.py, SearchEngine.py,
Separator.py, StackViewer.py, TODO.txt, ToolTip.py, TreeWidget.py,
UndoDelegator.py, WidgetRedirector.py, WindowList.py, help.txt,
ZoomHeight.py, config-unix.txt, config-win.txt, config.txt,
eventparse.py, extend.txt, idle.bat, idle.py, idle.pyw, idlever.py,
keydefs.py, loader.py, pyclbr.py, tabnanny.py, testcode.py,
EditorWindow.py, ExecBinding.py, Remote.py, protocol.py, spawn.py,
Icons/folder.gif, Icons/minusnode.gif, Icons/openfolder.gif,
Icons/plusnode.gif, Icons/python.gif, Icons/tk.gif: Initial
revision
2000-08-15 11:13 dscherer
* AutoExpand.py, AutoIndent.py, Bindings.py, CallTipWindow.py,
CallTips.py, __init__.py, ChangeLog, ClassBrowser.py,
ColorDelegator.py, ConfigParser.py, Debugger.py, Delegator.py,
FileList.py, FormatParagraph.py, FrameViewer.py, GrepDialog.py,
IOBinding.py, IdleConf.py, IdleHistory.py, MultiScrolledLists.py,
MultiStatusBar.py, NEWS.txt, ObjectBrowser.py, OldStackViewer.py,
OutputWindow.py, ParenMatch.py, PathBrowser.py, Percolator.py,
PyParse.py, PyShell.py, README.txt, ReplaceDialog.py,
ScriptBinding.py, ScrolledList.py, SearchBinding.py,
SearchDialog.py, SearchDialogBase.py, SearchEngine.py,
Separator.py, StackViewer.py, TODO.txt, ToolTip.py, TreeWidget.py,
UndoDelegator.py, WidgetRedirector.py, WindowList.py, help.txt,
ZoomHeight.py, config-unix.txt, config-win.txt, config.txt,
eventparse.py, extend.txt, idle.bat, idle.py, idle.pyw, idlever.py,
keydefs.py, loader.py, pyclbr.py, tabnanny.py, testcode.py,
EditorWindow.py, ExecBinding.py, Remote.py, protocol.py, spawn.py,
Icons/folder.gif, Icons/minusnode.gif, Icons/openfolder.gif,
Icons/plusnode.gif, Icons/python.gif, Icons/tk.gif: Modified IDLE
from VPython 0.2
original IDLE ChangeLog:
========================
Tue Feb 15 18:08:19 2000 Guido van Rossum <guido@cnri.reston.va.us>
* NEWS.txt: Notice status bar and stack viewer.
* EditorWindow.py: Support for Moshe's status bar.
* MultiStatusBar.py: Status bar code -- by Moshe Zadka.
* OldStackViewer.py:
Adding the old stack viewer implementation back, for the debugger.
* StackViewer.py: New stack viewer, uses a tree widget.
(XXX: the debugger doesn't yet use this.)
* WindowList.py:
Correct a typo and remove an unqualified except that was hiding the error.
* ClassBrowser.py: Add an XXX comment about the ClassBrowser AIP.
* ChangeLog: Updated change log.
* NEWS.txt: News update. Probably incomplete; what else is new?
* README.txt:
Updated for pending IDLE 0.5 release (still very rough -- just getting
it out in a more convenient format than CVS).
* TODO.txt: Tiny addition.
Thu Sep 9 14:16:02 1999 Guido van Rossum <guido@cnri.reston.va.us>
* TODO.txt: A few new TODO entries.
Thu Aug 26 23:06:22 1999 Guido van Rossum <guido@cnri.reston.va.us>
* Bindings.py: Add Python Documentation entry to Help menu.
* EditorWindow.py:
Find the help.txt file relative to __file__ or ".", not in sys.path.
(Suggested by Moshe Zadka, but implemented differently.)
Add <<python-docs>> event which, on Unix, brings up Netscape pointing
to http://www.python.doc/current/ (a local copy would be nice but its
location can't be predicted). Windows solution TBD.
Wed Aug 11 14:55:43 1999 Guido van Rossum <guido@cnri.reston.va.us>
* TreeWidget.py:
Moshe noticed an inconsistency in his comment, so I'm rephrasing it to
be clearer.
* TreeWidget.py:
Patch inspired by Moshe Zadka to search for the Icons directory in the
same directory as __file__, rather than searching for it along sys.path.
This works better when idle is a package.
Thu Jul 15 13:11:02 1999 Guido van Rossum <guido@cnri.reston.va.us>
* TODO.txt: New wishes.
Sat Jul 10 13:17:35 1999 Guido van Rossum <guido@cnri.reston.va.us>
* IdlePrefs.py:
Make the color for stderr red (i.e. the standard warning/danger/stop
color) rather than green. Suggested by Sam Schulenburg.
Fri Jun 25 17:26:34 1999 Guido van Rossum <guido@cnri.reston.va.us>
* PyShell.py: Close debugger when closing. This may break a cycle.
* Debugger.py: Break cycle on close.
* ClassBrowser.py: Destroy the tree when closing.
* TreeWidget.py: Add destroy() method to recursively destroy a tree.
* PyShell.py: Extend _close() to break cycles.
Break some other cycles too (and destroy the root when done).
* EditorWindow.py:
Add _close() method that does the actual cleanup (close() asks the
user what they want first if there's unsaved stuff, and may cancel).
It closes more than before.
Add unload_extensions() method to unload all extensions; called from
_close(). It calls an extension's close() method if it has one.
* Percolator.py: Add close() method that breaks cycles.
* WidgetRedirector.py: Add unregister() method.
Unregister everything at closing.
Don't call close() in __del__, rely on explicit call to close().
* IOBinding.py, FormatParagraph.py, CallTips.py:
Add close() method that breaks a cycle.
Fri Jun 11 15:03:00 1999 Guido van Rossum <guido@cnri.reston.va.us>
* AutoIndent.py, EditorWindow.py, FormatParagraph.py:
Tim Peters smart.patch:
EditorWindow.py:
+ Added get_tabwidth & set_tabwidth "virtual text" methods, that get/set the
widget's view of what a tab means.
+ Moved TK_TABWIDTH_DEFAULT here from AutoIndent.
+ Renamed Mark's get_selection_index to get_selection_indices (sorry, Mark,
but the name was plain wrong <wink>).
FormatParagraph.py: renamed use of get_selection_index.
AutoIndent.py:
+ Moved TK_TABWIDTH_DEFAULT to EditorWindow.
+ Rewrote set_indentation_params to use new VTW get/set_tabwidth methods.
+ Changed smart_backspace_event to delete whitespace back to closest
preceding virtual tab stop or real character (note that this may require
inserting characters if backspacing over a tab!).
+ Nuked almost references to the selection tag, in favor of using
get_selection_indices. The sole exception is in set_region, for which no
"set_selection" abstraction has yet been agreed upon.
+ Had too much fun using the spiffy new features of the format-paragraph
cmd.
Thu Jun 10 17:48:02 1999 Guido van Rossum <guido@cnri.reston.va.us>
* FormatParagraph.py:
Code by Mark Hammond to format paragraphs embedded in comments.
Read the comments (which I reformatted using the new feature :-)
for some limitations.
* EditorWindow.py:
Added abstraction get_selection_index() (Mark Hammond). Also
reformatted some comment blocks to show off a cool feature I'm about
to check in next.
* ClassBrowser.py:
Adapt to the new pyclbr's support of listing top-level functions. If
this functionality is not present (e.g. when used with a vintage
Python 1.5.2 installation) top-level functions are not listed.
(Hmm... Any distribution of IDLE 0.5 should probably include a copy
of the new pyclbr.py!)
* AutoIndent.py:
Fix off-by-one error in Tim's recent change to comment_region(): the
list of lines returned by get_region() contains an empty line at the
end representing the start of the next line, and this shouldn't be
commented out!
* CallTips.py:
Mark Hammond writes: Here is another change that allows it to work for
class creation - tries to locate an __init__ function. Also updated
the test code to reflect your new "***" change.
* CallTipWindow.py:
Mark Hammond writes: Tim's suggestion of copying the font for the
CallTipWindow from the text control makes sense, and actually makes
the control look better IMO.
Wed Jun 9 20:34:57 1999 Guido van Rossum <guido@cnri.reston.va.us>
* CallTips.py:
Append "..." if the appropriate flag (for varargs) in co_flags is set.
Ditto "***" for kwargs.
Tue Jun 8 13:06:07 1999 Guido van Rossum <guido@cnri.reston.va.us>
* ReplaceDialog.py:
Hmm... Tim didn't turn "replace all" into a single undo block.
I think I like it better if it os, so here.
* ReplaceDialog.py: Tim Peters: made replacement atomic for undo/redo.
* AutoIndent.py: Tim Peters:
+ Set usetabs=1. Editing pyclbr.py was driving me nuts <0.6 wink>.
usetabs=1 is the Emacs pymode default too, and thanks to indentwidth !=
tabwidth magical usetabs disabling, new files are still created with tabs
turned off. The only implication is that if you open a file whose first
indent is a single tab, IDLE will now magically use tabs for that file (and
set indentwidth to 8). Note that the whole scheme doesn't work right for
PythonWin, though, since Windows users typically set tabwidth to 4; Mark
probably has to hide the IDLE algorithm from them (which he already knows).
+ Changed comment_region_event to stick "##" in front of every line. The
"holes" previously left on blank lines were visually confusing (made it
needlessly hard to figure out what to uncomment later).
Mon Jun 7 15:38:40 1999 Guido van Rossum <guido@cnri.reston.va.us>
* TreeWidget.py, ObjectBrowser.py:
Remove unnecessary reference to pyclbr from test() code.
* PyParse.py: Tim Peters:
Smarter logic for finding a parse synch point.
Does a half to a fifth the work in normal cases; don't notice the speedup,
but makes more breathing room for other extensions.
Speeds terrible cases by at least a factor of 10. "Terrible" == e.g. you put
""" at the start of Tkinter.py, undo it, zoom to the bottom, and start
typing in code. Used to take about 8 seconds for ENTER to respond, now some
large fraction of a second. The new code gets indented correctly, despite
that it all remains "string colored" until the colorizer catches up (after
which, ENTER appears instantaneous again).
Fri Jun 4 19:21:19 1999 Guido van Rossum <guido@cnri.reston.va.us>
* extend.py: Might as well enable CallTips by default.
If there are too many complaints I'll remove it again or fix it.
Thu Jun 3 14:32:16 1999 Guido van Rossum <guido@cnri.reston.va.us>
* AutoIndent.py, EditorWindow.py, PyParse.py:
New offerings by Tim Peters; he writes:
IDLE is now the first Python editor in the Universe not confused by my
doctest.py <wink>.
As threatened, this defines IDLE's is_char_in_string function as a
method of EditorWindow. You just need to define one similarly in
whatever it is you pass as editwin to AutoIndent; looking at the
EditorWindow.py part of the patch should make this clear.
* GrepDialog.py: Enclose pattern in quotes in status message.
* CallTips.py:
Mark Hammond fixed some comments and improved the way the tip text is
constructed.
Wed Jun 2 18:18:57 1999 Guido van Rossum <guido@cnri.reston.va.us>
* CallTips.py:
My fix to Mark's code: restore the universal check on <KeyRelease>.
Always cancel on <Key-Escape> or <ButtonPress>.
* CallTips.py:
A version that Mark Hammond posted to the newsgroup. Has some newer
stuff for getting the tip. Had to fix the Key-( and Key-) events
for Unix. Will have to re-apply my patch for catching KeyRelease and
ButtonRelease events.
* CallTipWindow.py, CallTips.py:
Call tips by Mark Hammond (plus tiny fix by me.)
* IdleHistory.py:
Changes by Mark Hammond: (1) support optional output_sep argument to
the constructor so he can eliminate the sys.ps2 that PythonWin leaves
in the source; (2) remove duplicate history items.
* AutoIndent.py:
Changes by Mark Hammond to allow using IDLE extensions in PythonWin as
well: make three dialog routines instance variables.
* EditorWindow.py:
Change by Mark Hammond to allow using IDLE extensions in PythonWin as
well: make three dialog routines instance variables.
Tue Jun 1 20:06:44 1999 Guido van Rossum <guido@cnri.reston.va.us>
* AutoIndent.py: Hah! A fix of my own to Tim's code!
Unix bindings for <<toggle-tabs>> and <<change-indentwidth>> were
missing, and somehow that meant the events were never generated,
even though they were in the menu. The new Unix bindings are now
the same as the Windows bindings (M-t and M-u).
* AutoIndent.py, PyParse.py, PyShell.py: Tim Peters again:
The new version (attached) is fast enough all the time in every real module
I have <whew!>. You can make it slow by, e.g., creating an open list with
5,000 90-character identifiers (+ trailing comma) each on its own line, then
adding an item to the end -- but that still consumes less than a second on
my P5-166. Response time in real code appears instantaneous.
Fixed some bugs.
New feature: when hitting ENTER and the cursor is beyond the line's leading
indentation, whitespace is removed on both sides of the cursor; before
whitespace was removed only on the left; e.g., assuming the cursor is
between the comma and the space:
def something(arg1, arg2):
^ cursor to the left of here, and hit ENTER
arg2): # new line used to end up here
arg2): # but now lines up the way you expect
New hack: AutoIndent has grown a context_use_ps1 Boolean config option,
defaulting to 0 (false) and set to 1 (only) by PyShell. Reason: handling
the fancy stuff requires looking backward for a parsing synch point; ps1
lines are the only sensible thing to look for in a shell window, but are a
bad thing to look for in a file window (ps1 lines show up in my module
docstrings often). PythonWin's shell should set this true too.
Persistent problem: strings containing def/class can still screw things up
completely. No improvement. Simplest workaround is on the user's head, and
consists of inserting e.g.
def _(): pass
(or any other def/class) after the end of the multiline string that's
screwing them up. This is especially irksome because IDLE's syntax coloring
is *not* confused, so when this happens the colors don't match the
indentation behavior they see.
* AutoIndent.py: Tim Peters again:
[Tim, after adding some bracket smarts to AutoIndent.py]
> ...
> What it can't possibly do without reparsing large gobs of text is
> suggest a reasonable indent level after you've *closed* a bracket
> left open on some previous line.
> ...
The attached can, and actually fast enough to use -- most of the time. The
code is tricky beyond belief to achieve that, but it works so far; e.g.,
return len(string.expandtabs(str[self.stmt_start :
^ indents to caret
i],
^ indents to caret
self.tabwidth)) + 1
^ indents to caret
It's about as smart as pymode now, wrt both bracket and backslash
continuation rules. It does require reparsing large gobs of text, and if it
happens to find something that looks like a "def" or "class" or sys.ps1
buried in a multiline string, but didn't suck up enough preceding text to
see the start of the string, it's completely hosed. I can't repair that --
it's just too slow to reparse from the start of the file all the time.
AutoIndent has grown a new num_context_lines tuple attribute that controls
how far to look back, and-- like other params --this could/should be made
user-overridable at startup and per-file on the fly.
* PyParse.py: New file by Tim Peters:
One new file in the attached, PyParse.py. The LineStudier (whatever it was
called <wink>) class was removed from AutoIndent; PyParse subsumes its
functionality.
* AutoIndent.py: Tim Peters keeps revising this module (more to come):
Removed "New tabwidth" menu binding.
Added "a tab means how many spaces?" dialog to block tabify and untabify. I
think prompting for this is good now: they're usually at-most-once-per-file
commands, and IDLE can't let them change tabwidth from the Tk default
anymore, so IDLE can no longer presume to have any idea what a tab means.
Irony: for the purpose of keeping comments aligned via tabs, Tk's
non-default approach is much nicer than the Emacs/Notepad/Codewright/vi/etc
approach.
* EditorWindow.py:
1. Catch NameError on import (could be raised by case mismatch on Windows).
2. No longer need to reset pyclbr cache and show watch cursor when calling
ClassBrowser -- the ClassBrowser takes care of pyclbr and the TreeWidget
takes care of the watch cursor.
3. Reset the focus to the current window after error message about class
browser on buffer without filename.
* Icons/minusnode.gif, Icons/plusnode.gif: Missed a few.
* ClassBrowser.py, PathBrowser.py: Rewritten based on TreeWidget.py
* ObjectBrowser.py: Object browser, based on TreeWidget.py.
* TreeWidget.py: Tree widget done right.
* ToolTip.py: As yet unused code for tool tips.
* ScriptBinding.py:
Ensure sys.argv[0] is the script name on Run Script.
* ZoomHeight.py: Move zoom height functionality to separate function.
* Icons/folder.gif, Icons/openfolder.gif, Icons/python.gif, Icons/tk.gif:
A few icons used by ../TreeWidget.py and its callers.
* AutoIndent.py: New version by Tim Peters improves block opening test.
Fri May 21 04:46:17 1999 Guido van Rossum <guido@cnri.reston.va.us>
* Attic/History.py, PyShell.py: Rename History to IdleHistory.
Add isatty() to pseudo files.
* StackViewer.py: Make initial stack viewer wider
* TODO.txt: New wishes
* AutoIndent.py, EditorWindow.py, PyShell.py:
Much improved autoindent and handling of tabs,
by Tim Peters.
Mon May 3 15:49:52 1999 Guido van Rossum <guido@cnri.reston.va.us>
* AutoIndent.py, EditorWindow.py, FormatParagraph.py, UndoDelegator.py:
Tim Peters writes:
I'm still unsure, but couldn't stand the virtual event trickery so tried a
different sin (adding undo_block_start/stop methods to the Text instance in
EditorWindow.py). Like it or not, it's efficient and works <wink>. Better
idea?
Give the attached a whirl. Even if you hate the implementation, I think
you'll like the results. Think I caught all the "block edit" cmds,
including Format Paragraph, plus subtler ones involving smart indents and
backspacing.
* WidgetRedirector.py: Tim Peters writes:
[W]hile trying to dope out how redirection works, stumbled into two
possible glitches. In the first, it doesn't appear to make sense to try to
rename a command that's already been destroyed; in the second, the name
"previous" doesn't really bring to mind "ignore the previous value" <wink>.
Fri Apr 30 19:39:25 1999 Guido van Rossum <guido@cnri.reston.va.us>
* __init__.py: Support for using idle as a package.
* PathBrowser.py:
Avoid listing files more than once (e.g. foomodule.so has two hits:
once for foo + module.so, once for foomodule + .so).
Mon Apr 26 22:20:38 1999 Guido van Rossum <guido@cnri.reston.va.us>
* ChangeLog, ColorDelegator.py, PyShell.py: Tim Peters strikes again:
Ho ho ho -- that's trickier than it sounded! The colorizer is working with
"line.col" strings instead of Text marks, and the absolute coordinates of
the point of interest can change across the self.update call (voice of
baffled experience, when two quick backspaces no longer fooled it, but a
backspace followed by a quick ENTER did <wink>).
Anyway, the attached appears to do the trick. CPU usage goes way up when
typing quickly into a long triple-quoted string, but the latency is fine for
me (a relatively fast typist on a relatively slow machine). Most of the
changes here are left over from reducing the # of vrbl names to help me
reason about the logic better; I hope the code is a *little* easier to
Fri Apr 23 14:01:25 1999 Guido van Rossum <guido@cnri.reston.va.us>
* EditorWindow.py:
Provide full arguments to __import__ so it works in packagized IDLE.
Thu Apr 22 23:20:17 1999 Guido van Rossum <guido@cnri.reston.va.us>
* help.txt:
Bunch of updates necessary due to recent changes; added docs for File
menu, command line and color preferences.
* Bindings.py: Remove obsolete 'script' menu.
* TODO.txt: Several wishes fulfilled.
* OutputWindow.py:
Moved classes OnDemandOutputWindow and PseudoFile here,
from ScriptBinding.py where they are no longer needed.
* ScriptBinding.py:
Mostly rewritten. Instead of the old Run module and Debug module,
there are two new commands:
Import module (F5) imports or reloads the module and also adds its
name to the __main__ namespace. This gets executed in the PyShell
window under control of its debug settings.
Run script (Control-F5) is similar but executes the contents of the
file directly in the __main__ namespace.
* PyShell.py: Nits: document use of $IDLESTARTUP; display idle version
* idlever.py: New version to celebrate new command line
* OutputWindow.py: Added flush(), for completeness.
* PyShell.py:
A lot of changes to make the command line more useful. You can now do:
idle.py -e file ... -- to edit files
idle.py script arg ... -- to run a script
idle.py -c cmd arg ... -- to run a command
Other options, see also the usage message (also new!) for more details:
-d -- enable debugger
-s -- run $IDLESTARTUP or $PYTHONSTARTUP
-t title -- set Python Shell window's title
sys.argv is set accordingly, unless -e is used.
sys.path is absolutized, and all relevant paths are inserted into it.
Other changes:
- the environment in which commands are executed is now the
__main__ module
- explicitly save sys.stdout etc., don't restore from sys.__stdout__
- new interpreter methods execsource(), execfile(), stuffsource()
- a few small nits
* TODO.txt:
Some more TODO items. Made up my mind about command line args,
Run/Import, __main__.
* ColorDelegator.py:
Super-elegant patch by Tim Peters that speeds up colorization
dramatically (up to 15 times he claims). Works by reading more than
one line at a time, up to 100-line chunks (starting with one line and
then doubling up to the limit). On a typical machine (e.g. Tim's
P5-166) this doesn't reduce interactive responsiveness in a noticeable
way.
Wed Apr 21 15:49:34 1999 Guido van Rossum <guido@cnri.reston.va.us>
* ColorDelegator.py:
Patch by Tim Peters to speed up colorizing of big multiline strings.
Tue Apr 20 17:32:52 1999 Guido van Rossum <guido@cnri.reston.va.us>
* extend.txt:
For an event 'foo-bar', the corresponding method must be called
foo_bar_event(). Therefore, fix the references to zoom_height() in
the example.
* IdlePrefs.py: Restored the original IDLE color scheme.
* PyShell.py, IdlePrefs.py, ColorDelegator.py, EditorWindow.py:
Color preferences code by Loren Luke (massaged by me somewhat)
* SearchEngine.py:
Patch by Mark Favas: it fixes the search engine behaviour where an
unsuccessful search wraps around and re-searches that part of the file
between the start of the search and the end of the file - only really
an issue for very large files, but... (also removes a redundant
m.span() call).
Mon Apr 19 16:26:02 1999 Guido van Rossum <guido@cnri.reston.va.us>
* TODO.txt: A few wishes are now fulfilled.
* AutoIndent.py: Tim Peters implements some of my wishes:
o Makes the tab key intelligently insert spaces when appropriate
(see Help list banter twixt David Ascher and me; idea stolen from
every other editor on earth <wink>).
o newline_and_indent_event trims trailing whitespace on the old
line (pymode and Codewright).
o newline_and_indent_event no longer fooled by trailing whitespace or
comment after ":" (pymode, PTUI).
o newline_and_indent_event now reduces the new line's indentation after
return, break, continue, raise and pass stmts (pymode).
The last two are easy to fool in the presence of strings &
continuations, but pymode requires Emacs's high-powered C parsing
functions to avoid that in finite time.
======================================================================
Python release 1.5.2c1, IDLE version 0.4
======================================================================
Wed Apr 7 18:41:59 1999 Guido van Rossum <guido@cnri.reston.va.us>
* README.txt, NEWS.txt: New version.
* idlever.py: Version bump awaiting impending new release.
(Not much has changed :-( )
Mon Mar 29 14:52:28 1999 Guido van Rossum <guido@cnri.reston.va.us>
* ScriptBinding.py, PyShell.py:
At Tim Peters' recommendation, add a dummy flush() method to
PseudoFile.
Thu Mar 11 23:21:23 1999 Guido van Rossum <guido@cnri.reston.va.us>
* PathBrowser.py: Don't crash when sys.path contains an empty string.
* Attic/Outline.py: This file was never supposed to be part of IDLE.
* PathBrowser.py:
- Don't crash in the case where a superclass is a string instead of a
pyclbr.Class object; this can happen when the superclass is
unrecognizable (to pyclbr), e.g. when module renaming is used.
- Show a watch cursor when calling pyclbr (since it may take a while
recursively parsing imported modules!).
Wed Mar 10 05:18:02 1999 Guido van Rossum <guido@cnri.reston.va.us>
* EditorWindow.py, Bindings.py: Add PathBrowser to File module
* PathBrowser.py: "Path browser" - 4 scrolled lists displaying:
directories on sys.path
modules in selected directory
classes in selected module
methods of selected class
Sinlge clicking in a directory, module or class item updates the next
column with info about the selected item. Double clicking in a
module, class or method item opens the file (and selects the clicked
item if it is a class or method).
I guess eventually I should be using a tree widget for this, but the
ones I've seen don't work well enough, so for now I use the old
Smalltalk or NeXT style multi-column hierarchical browser.
* MultiScrolledLists.py:
New utility: multiple scrolled lists in parallel
* ScrolledList.py: - White background.
- Display "(None)" (or text of your choosing) when empty.
- Don't set the focus.
======================================================================
Python release 1.5.2b2, IDLE version 0.3
======================================================================
Wed Feb 17 22:47:41 1999 Guido van Rossum <guido@cnri.reston.va.us>
* NEWS.txt: News in 0.3.
* README.txt, idlever.py: Bump version to 0.3.
* EditorWindow.py:
After all, we don't need to call the callbacks ourselves!
* WindowList.py:
When deleting, call the callbacks *after* deleting the window from our list!
* EditorWindow.py:
Fix up the Windows menu via the new callback mechanism instead of
depending on menu post commands (which don't work when the menu is
torn off).
* WindowList.py:
Support callbacks to patch up Windows menus everywhere.
* ChangeLog: Oh, why not. Checking in the Emacs-generated change log.
Tue Feb 16 22:34:17 1999 Guido van Rossum <guido@cnri.reston.va.us>
* ScriptBinding.py:
Only pop up the stack viewer when requested in the Debug menu.
Mon Feb 8 22:27:49 1999 Guido van Rossum <guido@cnri.reston.va.us>
* WindowList.py: Don't crash if a window no longer exists.
* TODO.txt: Restructured a bit.
Mon Feb 1 23:06:17 1999 Guido van Rossum <guido@cnri.reston.va.us>
* PyShell.py: Add current dir or paths of file args to sys.path.
* Debugger.py: Add canonic() function -- for brand new bdb.py feature.
* StackViewer.py: Protect against accessing an empty stack.
Fri Jan 29 20:44:45 1999 Guido van Rossum <guido@cnri.reston.va.us>
* ZoomHeight.py:
Use only the height to decide whether to zoom in or out.
Thu Jan 28 22:24:30 1999 Guido van Rossum <guido@cnri.reston.va.us>
* EditorWindow.py, FileList.py:
Make sure the Tcl variables are shared between windows.
* PyShell.py, EditorWindow.py, Bindings.py:
Move menu/key binding code from Bindings.py to EditorWindow.py,
with changed APIs -- it makes much more sense there.
Also add a new feature: if the first character of a menu label is
a '!', it gets a checkbox. Checkboxes are bound to Boolean Tcl variables
that can be accessed through the new getvar/setvar/getrawvar API;
the variable is named after the event to which the menu is bound.
* Debugger.py: Add Quit button to the debugger window.
* SearchDialog.py:
When find_again() finds exactly the current selection, it's a failure.
* idle.py, Attic/idle: Rename idle -> idle.py
Mon Jan 18 15:18:57 1999 Guido van Rossum <guido@cnri.reston.va.us>
* EditorWindow.py, WindowList.py: Only deiconify when iconic.
* TODO.txt: Misc
Tue Jan 12 22:14:34 1999 Guido van Rossum <guido@cnri.reston.va.us>
* testcode.py, Attic/test.py:
Renamed test.py to testcode.py so one can import Python's
test package from inside IDLE. (Suggested by Jack Jansen.)
* EditorWindow.py, ColorDelegator.py:
Hack to close a window that is colorizing.
* Separator.py: Vladimir Marangozov's patch:
The separator dances too much and seems to jump by arbitrary amounts
in arbitrary directions when I try to move it for resizing the frames.
This patch makes it more quiet.
Mon Jan 11 14:52:40 1999 Guido van Rossum <guido@cnri.reston.va.us>
* TODO.txt: Some requests have been fulfilled.
* EditorWindow.py:
Set the cursor to a watch when opening the class browser (which may
take quite a while, browsing multiple files).
Newer, better center() -- but assumes no wrapping.
* SearchBinding.py:
Got rid of debug print statement in goto_line_event().
* ScriptBinding.py:
I think I like it better if it prints the traceback even when it displays
the stack viewer.
* Debugger.py: Bind ESC to close-window.
* ClassBrowser.py: Use a HSeparator between the classes and the items.
Make the list of classes wider by default (40 chars).
Bind ESC to close-window.
* Separator.py:
Separator classes (draggable divider between two panes).
Sat Jan 9 22:01:33 1999 Guido van Rossum <guido@cnri.reston.va.us>
* WindowList.py:
Don't traceback when wakeup() is called when the window has been destroyed.
This can happen when a torn-of Windows menu references closed windows.
And Tim Peters claims that the Windows menu is his favorite to tear off...
* EditorWindow.py: Allow tearing off of the Windows menu.
* StackViewer.py: Close on ESC.
* help.txt: Updated a bunch of things (it was mostly still 0.1!)
* extend.py: Added ScriptBinding to standard bindings.
* ScriptBinding.py:
This now actually works. See doc string. It can run a module (i.e.
import or reload) or debug it (same with debugger control). Output
goes to a fresh output window, only created when needed.
======================================================================
Python release 1.5.2b1, IDLE version 0.2
======================================================================
Fri Jan 8 17:26:02 1999 Guido van Rossum <guido@cnri.reston.va.us>
* README.txt, NEWS.txt: What's new in this release.
* Bindings.py, PyShell.py:
Paul Prescod's patches to allow the stack viewer to pop up when a
traceback is printed.
Thu Jan 7 00:12:15 1999 Guido van Rossum <guido@cnri.reston.va.us>
* FormatParagraph.py:
Change paragraph width limit to 70 (like Emacs M-Q).
* README.txt:
Separating TODO from README. Slight reformulation of features. No
exact release date.
* TODO.txt: Separating TODO from README.
Mon Jan 4 21:19:09 1999 Guido van Rossum <guido@cnri.reston.va.us>
* FormatParagraph.py:
Hm. There was a boundary condition error at the end of the file too.
* SearchBinding.py: Hm. Add Unix binding for replace, too.
* keydefs.py: Ran eventparse.py again.
* FormatParagraph.py: Added Unix Meta-q key binding;
fix find_paragraph when at start of file.
* AutoExpand.py: Added Meta-/ binding for Unix as alt for Alt-/.
* SearchBinding.py:
Add unix binding for grep (otherwise the menu entry doesn't work!)
* ZoomHeight.py: Adjusted Unix height to work with fvwm96. :=(
* GrepDialog.py: Need to import sys!
* help.txt, extend.txt, README.txt: Formatted some paragraphs
* extend.py, FormatParagraph.py:
Add new extension to reformat a (text) paragraph.
* ZoomHeight.py: Typo in Win specific height setting.
Sun Jan 3 00:47:35 1999 Guido van Rossum <guido@cnri.reston.va.us>
* AutoIndent.py: Added something like Tim Peters' backspace patch.
* ZoomHeight.py: Adapted to Unix (i.e., more hardcoded constants).
Sat Jan 2 21:28:54 1999 Guido van Rossum <guido@cnri.reston.va.us>
* keydefs.py, idlever.py, idle.pyw, idle.bat, help.txt, extend.txt, extend.py, eventparse.py, ZoomHeight.py, WindowList.py, UndoDelegator.py, StackViewer.py, SearchEngine.py, SearchDialogBase.py, SearchDialog.py, ScrolledList.py, SearchBinding.py, ScriptBinding.py, ReplaceDialog.py, Attic/README, README.txt, PyShell.py, Attic/PopupMenu.py, OutputWindow.py, IOBinding.py, Attic/HelpWindow.py, History.py, GrepDialog.py, FileList.py, FrameViewer.py, EditorWindow.py, Debugger.py, Delegator.py, ColorDelegator.py, Bindings.py, ClassBrowser.py, AutoExpand.py, AutoIndent.py:
Checking in IDLE 0.2.
Much has changed -- too much, in fact, to write down.
The big news is that there's a standard way to write IDLE extensions;
see extend.txt. Some sample extensions have been provided, and
some existing code has been converted to extensions. Probably the
biggest new user feature is a new search dialog with more options,
search and replace, and even search in files (grep).
This is exactly as downloaded from my laptop after returning
from the holidays -- it hasn't even been tested on Unix yet.
Fri Dec 18 15:52:54 1998 Guido van Rossum <guido@cnri.reston.va.us>
* FileList.py, ClassBrowser.py:
Fix the class browser to work even when the file is not on sys.path.
Tue Dec 8 20:39:36 1998 Guido van Rossum <guido@cnri.reston.va.us>
* Attic/turtle.py: Moved to Python 1.5.2/Lib
Fri Nov 27 03:19:20 1998 Guido van Rossum <guido@cnri.reston.va.us>
* help.txt: Typo
* EditorWindow.py, FileList.py: Support underlining of menu labels
* Bindings.py:
New approach, separate tables for menus (platform-independent) and key
definitions (platform-specific), and generating accelerator strings
automatically from the key definitions.
Mon Nov 16 18:37:42 1998 Guido van Rossum <guido@cnri.reston.va.us>
* Attic/README: Clarify portability and main program.
* Attic/README: Added intro for 0.1 release and append Grail notes.
Mon Oct 26 18:49:00 1998 Guido van Rossum <guido@cnri.reston.va.us>
* Attic/turtle.py: root is now a global called _root
Sat Oct 24 16:38:38 1998 Guido van Rossum <guido@cnri.reston.va.us>
* Attic/turtle.py: Raise the root window on reset().
Different action on WM_DELETE_WINDOW is more likely to do the right thing,
allowing us to destroy old windows.
* Attic/turtle.py:
Split the goto() function in two: _goto() is the internal one,
using Canvas coordinates, and goto() uses turtle coordinates
and accepts variable argument lists.
* Attic/turtle.py: Cope with destruction of the window
* Attic/turtle.py: Turtle graphics
* Debugger.py: Use of Breakpoint class should be bdb.Breakpoint.
Mon Oct 19 03:33:40 1998 Guido van Rossum <guido@cnri.reston.va.us>
* SearchBinding.py:
Speed up the search a bit -- don't drag a mark around...
* PyShell.py:
Change our special entries from <console#N> to <pyshell#N>.
Patch linecache.checkcache() to keep our special entries alive.
Add popup menu to all editor windows to set a breakpoint.
* Debugger.py:
Use and pass through the 'force' flag to set_dict() where appropriate.
Default source and globals checkboxes to false.
Don't interact in user_return().
Add primitive set_breakpoint() method.
* ColorDelegator.py:
Raise priority of 'sel' tag so its foreground (on Windows) will take
priority over text colorization (which on Windows is almost the
same color as the selection background).
Define a tag and color for breakpoints ("BREAK").
* Attic/PopupMenu.py: Disable "Open stack viewer" and "help" commands.
* StackViewer.py:
Add optional 'force' argument (default 0) to load_dict().
If set, redo the display even if it's the same dict.
Fri Oct 16 21:10:12 1998 Guido van Rossum <guido@cnri.reston.va.us>
* StackViewer.py: Do nothing when loading the same dict as before.
* PyShell.py: Details for debugger interface.
* Debugger.py:
Restructured and more consistent. Save checkboxes across instantiations.
* EditorWindow.py, Attic/README, Bindings.py:
Get rid of conflicting ^X binding. Use ^W.
* Debugger.py, StackViewer.py:
Debugger can now show local and global variables.
* Debugger.py: Oops
* Debugger.py, PyShell.py: Better debugger support (show stack etc).
* Attic/PopupMenu.py: Follow renames in StackViewer module
* StackViewer.py:
Rename classes to StackViewer (the widget) and StackBrowser (the toplevel).
* ScrolledList.py: Add close() method
* EditorWindow.py: Clarify 'Open Module' dialog text
* StackViewer.py: Restructured into a browser and a widget.
Thu Oct 15 23:27:08 1998 Guido van Rossum <guido@cnri.reston.va.us>
* ClassBrowser.py, ScrolledList.py:
Generalized the scrolled list which is the base for the class and
method browser into a separate class in its own module.
* Attic/test.py: Cosmetic change
* Debugger.py: Don't show function name if there is none
Wed Oct 14 03:43:05 1998 Guido van Rossum <guido@cnri.reston.va.us>
* Debugger.py, PyShell.py: Polish the Debugger GUI a bit.
Closing it now also does the right thing.
Tue Oct 13 23:51:13 1998 Guido van Rossum <guido@cnri.reston.va.us>
* Debugger.py, PyShell.py, Bindings.py:
Ad primitive debugger interface (so far it will step and show you the
source, but it doesn't yet show the stack).
* Attic/README: Misc
* StackViewer.py: Whoops -- referenced self.top before it was set.
* help.txt: Added history and completion commands.
* help.txt: Updated
* FileList.py: Add class browser functionality.
* StackViewer.py:
Add a close() method and bind to WM_DELETE_WINDOW protocol
* PyShell.py: Clear the linecache before printing a traceback
* Bindings.py: Added class browser binding.
* ClassBrowser.py: Much improved, much left to do.
* PyShell.py: Make the return key do what I mean more often.
* ClassBrowser.py:
Adding the beginnings of a Class browser. Incomplete, yet.
* EditorWindow.py, Bindings.py:
Add new command, "Open module". You select or type a module name,
and it opens the source.
Mon Oct 12 23:59:27 1998 Guido van Rossum <guido@cnri.reston.va.us>
* PyShell.py: Subsume functionality from Popup menu in Debug menu.
Other stuff so the PyShell window can be resurrected from the Windows menu.
* FileList.py: Get rid of PopUp menu.
Create a simple Windows menu. (Imperfect when Untitled windows exist.)
Add wakeup() method: deiconify, raise, focus.
* EditorWindow.py: Generalize menu creation.
* Bindings.py: Add Debug and Help menu items.
* EditorWindow.py: Added a menu bar to every window.
* Bindings.py: Add menu configuration to the event configuration.
* Attic/PopupMenu.py: Pass a root to the help window.
* SearchBinding.py:
Add parent argument to 'to to line number' dialog box.
Sat Oct 10 19:15:32 1998 Guido van Rossum <guido@cnri.reston.va.us>
* StackViewer.py:
Add a label at the top showing (very basic) help for the stack viewer.
Add a label at the bottom showing the exception info.
* Attic/test.py, Attic/idle: Add Unix main script and test program.
* idle.pyw, help.txt, WidgetRedirector.py, UndoDelegator.py, StackViewer.py, SearchBinding.py, Attic/README, PyShell.py, Attic/PopupMenu.py, Percolator.py, Outline.py, IOBinding.py, History.py, Attic/HelpWindow.py, FrameViewer.py, FileList.py, EditorWindow.py, Delegator.py, ColorDelegator.py, Bindings.py, AutoIndent.py, AutoExpand.py:
Initial checking of Tk-based Python IDE.
Features: text editor with syntax coloring and undo;
subclassed into interactive Python shell which adds history.
SEA-GHOST - SHELL CODING BY SEA-GHOST